|
|||
 |
 |
Military Fluids
| ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Radco Industries, Inc. |  |
| PO Box 305 | |
| LaFox, IL 60147 | Manufacturing Location: LaFox IL |
| Telephone: (800) 854-4865Fax: (630) 232-7968 |
|
DESCRIPTION |
REQUIREMENT |
TYP. RESULT |
TEST METHOD |
| Kinematic Viscosity, Centistokes |
|
|
|
| @ 0 °C, | 76 cSt max | 67.1cSt | ASTM-D455 |
| @ 100 °C, | 3.0 cSt max | 2.31cSt | ASTM-D455 |
| @ 40 °C | 12 cSt max | 9.3 cSt | ASTM-D455 |
| Pour Point Color Interfacial Tension Analine Point °C |
-40°F max 0.5 max >39.99 dynes/cm 76°C max |
-52 °F <0.5 49 74 |
ASTM-D97 ASTM-D1500 ASTM-D971 ASTM-D611 |
| Visual Exam Flash Point, minimum |
clear and bright >294.99 °F |
pass 305 °F / 150 °C |
ASTM-D1524 ASTM-D92 |
| Density @15°C/15°C | 0.91 max | 0.8930 | ASTM-D1298 |
| Total acid number, max. | 0.3 mg KOH/g | 0.0 mg KOH/gm | ASTM-D974 |
| Water content, Karl Fisher | 35 ppm max | 8 ppm | ASTM-D1533 |
| Dielectric Strength VDE Electrodes Impulse Strength Dissipation (Power) Factor @ 25 °C @ 100 °C |
>29.9 KVA >34.9 KVA >145 KVA 0.05% max 0.3% max |
42 KVA 32 KVA 226 KVA 0.009% 0.06% |
ASTM-D877 ASTM-D1816 ASTM-D3300 ASTM-D924 ASTM-D924 |
CHARACTERISTIC |
REQUIREMENT |
RESULT |
TEST METHOD |
| Oxidation stability, 72h | |
|
|
| % sludge, max (by mass) | 0.15 max | 0.08 | ASTM-D2440 |
| TAN, max mg KOH/g | 0.5 max | 0.31 | ASTM-D2440 |
| Oxidation stability, 164h | |
|
|
| % sludge, max (by mass) | 0.3 max | 0.1 | ASTM-D2440 |
| TAN, max mg KOH/g | 0.6 max | 0.30 | ASTM-D2440 |
| Oxidation Stability (RBOT) | NA | ASTM-D2112 | |
| Oxidation inhibitor content | 0.08 % max | none | ASTM-D2668 |
| Corrosive sulfur | non-corrosive | pass | ASTM-D1275 |
| PCB Content | non-detectable | pass | ASTM-D4059 |
| Pounds per US Gallon | none | 7.4 A | STM-D4052 |
| API gravity @ 60°F | none | 26.96 | ASTM-D4052 |
| Operations Approval | none | approved | |
XCELTHERM® Electrical Insulation Oil (Type I) meets military standard specifications for electrical oil applications. XCELTHERM® EIO-I has high electrical resistance and is both thermally and oxidatively stable. XCELTHERM® EIO-I is intended for use in most common electrical insulating oil applications where normal oxidation resistance is required. It is compatible with other electrical insulating oils, including Shell Diala® A
CALL FOR AN MSDS!Worldwide - 630.232.7966
US - 800.854.4865
|
|
 |