Fluids Archive - Radco Ind

RADCOLUBE® 680 TYPE 4

Posted in Aviation Application Products, Military Lubricants.

RADCOLUBE® 680 TYPE 4 is a degreasing solvent, high flash point with citrus odor.

RADCOLUBE® 680 TYPE 2

Posted in Aviation Application Products, Military Lubricants.

RADCOLUBE® 680 TYPE 2 is a degreasing solvent, high flash point, low odor.

XCELTHERM® 4000

Posted in Heat Transfer Fluids, Hot Oil Heat Transfer Fluids.

Heating or cooling from –50°F to 640°F (-45°C to 338°C); non-toxic, odorless and food contact rated; and high heat transfer for increased output. Excellent thermal and oxidative stability

RADCOLUBE® 6081N

Posted in Aviation Application Products, Military Lubricants.

This product is a petroleum-based, jet engine lubricating oil. The 1010 Grade is intended for use in specific models of military jet engines.

RADCOLUBE® 6085

Posted in Aerospace, Aerospace Products, Aviation Application Products, Military Lubricants.

Lubricating oil designed for use in aircraft instruments, electronic equipment or where low-evaporation oil is required for both high and low-temperature applications and where oxidation and corrosion resistance is desirable.

XCELTHERM® SX800

Posted in Heat Transfer Fluids, Silicone Heat Transfer Fluids.

Silicone based for high thermal stability and oxidative resistance at high operating temperatures up to 750°F (400°C) with a low start-up temperature of under -40°F (-40°C).

XCELTHERM® SX500

Posted in Heat Transfer Fluids, Silicone Heat Transfer Fluids.

XCELTHERM® SX500 is a polydimethylsiloxane-based fluid for laboratory/testing bath applications. XCELTHERM® SX500 can be used in open bath operating temperatures from ambient to 170°C (338°F), with outstanding oxidative stability properties. In closed systems, XCELTHERM® SX500 can be operated at temperatures from -40°C to 230°C (-40°F to 446°F), with excellent inherent thermal stability, assuring extended fluid life and optimal heat transfer efficiency.

RADCOLUBE® 500M

Posted in Aerospace, Aerospace Products.

A military-qualified dielectric/cooling fluid consisting of a synthetic hydrocarbon base oil and additives. Designed for safe use in land and airborne closed loop cooling systems, RADCOLUBE® 500M demonstrates excellent heat transfer fluid properties, oxidative stability and dielectric characteristics in both military and commercial applications from -54°C (-65°F) to 135°C (275°F).

RADCOLUBE® 6086L

Posted in Aviation Application Products, Military Lubricants.

Lubricating Oil, Gear, Petroleum Base, Light Grade is intended for use in light-to-moderate-loaded gear trains or gear boxes that operate in low-to-medium-speed ranges down to -40°C.

RADCOLUBE® BIOBASED CLP

Posted in Land Based Application Products, Military Lubricants.

This product is for use in cleaning, lubricating and short-term preservation of small and large caliber military weapons, operating in the temperature range of -51°C to +71°C (-60°F to +160°F). USDA certified 73% Biobased product.